This board is good for every surfer and it allows to enjoy all wave conditions, from beach breaks with shorter waves to reefs up to 7/8 ft. The features that allow this versatility are its wide outline on the lower part of the nose and the round pin tail, the volume moved directly below the surfer makes the board easy to find in the row and very stable.
The roker is flat with most accentuated end and this particularity guarantees control and maneuverability in the most steep sections; the 60/40 boxy rail with the edge on the tail joined to a generous tail make this board fluid in the wall and in directional changes. Fins made out of okumè are embedded in the bottom and resinated, forming a single body with the board reducing turbulence in the tail zone. The graphic is made of laminated cotton fabric.
Dimension: 5’6″ x 20 x 2 1/2″
Rail: 60/40. Hard in the tail, softer in center and nose Rocker: nose 4.5” / tail 2.6” Bottom: flat Fins: quad fin set-up FCS or glass-on
Construction: paulownia hollow wood
Do you wanna make your own surfboard?
DO IT YOURSELF SURFBOARD KIT
You don’t need to have experience in wood working or modeling, every kit is designed to be made by anyone who has the space to make it.